Practically all stitch and glue boats are given a sheathing of fiberglass cloth soaked in epoxy resin. this layer is used to add a high degree of protection, strength, abrasion and impact resistance. the lower cost chopped strand mats will add bulk and stiffness but not much strength.. Epoxy is a relatively recent invention, and literally thousands of 'stitch 'n glue' boats were built in the 60's and 70's with glass tape and polyester resin. one of the best known perhaps being the mirror dinghy - they were all built from kits, and i think at least 50,000 were produced.. The stitch and glue canoe building method is an easy and affordable way for a beginning canoeist to make his or her own boat. basically, the technique consists of gluing panels of plywood together using epoxy and fiberglass..
Talked with a supply company about building a stitch and glue boat. was told not to buy epoxy resin unless using for scarf joints, because of the heat in florida would make the fiberglass too flexible. please help! (every boat builder set of plans i have looked at says epoxy resin not polyester for fiberglass work and scarf joints). Typical stitch and glue fiberglass seam made of fiberglass tape over an epoxy putty fillet. epoxy putty fillet at the bow. some tips:-spread the epoxy putty with a tongue depressor, it produces the perfect radius.-brush epoxy over the wet putty and apply the tape immediately.-for a perfect job, use a fiberglass lamination roller.. Stitch and glue boatbuilding method using plywood and epoxy, stitch and glue boatbuilding method using epoxy is a fast and easy way for a beginners to make a plywood boat stitch and glue - materials for stitch and glue boats, we also have found having 5 minute epoxy around can be quite helpful and speed up the building process when tacking things into place. we prefer system three’s goof.
0 komentar:
Posting Komentar